Skip to main content

Replies sorted oldest to newest

That would depend on whether you have a link pin front spindle or a ball joint spindle.  You’ll have to get under there and find out (if you haven’t already).

Since it is a CMC we can assume that it sits on a VW donor chassis.  If that’s the case, you could look up the chassis VIN # to find out what year it is and then buy a set of oil-filled shocks for that year.  A set for a stock, VW sedan for thar year should be fine.

Is your car registered as a -- year VW? '65 and older is link/king pin front suspension (shocks will have horizontal bosses), '66 and newer is ball joint (shock top will have a vertical stud).

ball joint beam

Here's what a ball joint beam looks like. Disregard the writing- it's for something else. Sorry, don't have time to find a pic of a k/l pin beam.

Attachments

Images (1)
  • ball joint beam
ALB posted:

Is your car registered as a -- year VW? '65 and older is link/king pin front suspension (shocks will have horizontal bosses), '66 and newer is ball joint (shock top will have a vertical stud).

ball joint beam

Here's what a ball joint beam looks like. Disregard the writing- it's for something else. Sorry, don't have time to find a pic of a k/l pin beam.

Link-Kingpin-and-Balljoint

You're better off making a visual check of what you have in the front as opposed to using the VIN # and checking the date of the chassis. My car is on a 1960 chassis but Vintage Speedsters built the car and converted the front suspension to ball joint and the rear to a swing axle.

Attachments

Images (1)
  • Link-Kingpin-and-Balljoint

C36B83EE-21CD-476F-B749-2C12E476EFE9AD8F3B7E-CC66-43B5-8220-C90F6F60907FI have KYB shocks on my ‘56 CMC Speedster on a ‘71 VW pan but only have about 18,000 miles on it, so since I don’t have a comparison with other shocks they seem to be just fine when I drive. When I used to cross the Yolo Causeway Bridge going from Sacramento to San Francisco I used to feel harshly the 21 concrete expansion seams in my real 1960 Porsche 356B coupe, however, I can barely feel them at all when driving my CMC Speedy.

Attachments

Images (2)
  • C36B83EE-21CD-476F-B749-2C12E476EFE9
  • AD8F3B7E-CC66-43B5-8220-C90F6F60907F

More information is needed to answer any question about spring rates and shocks.  The stock spring rates front and rear are 100#.  I race my car and have 200# in front and 250# in the rear.  It actually still rides well enough to drive on the street.  There are a million different combinations for the suspension.  You have to decide what you are going to use the car for first, then start tweaking the suspension.

curtissb posted:

More information is needed to answer any question about spring rates and shocks.  The stock spring rates front and rear are 100#.  I race my car and have 200# in front and 250# in the rear.  It actually still rides well enough to drive on the street.  There are a million different combinations for the suspension.  You have to decide what you are going to use the car for first, then start tweaking the suspension.

@curtissb thanks. Good start. 

IaM-Ray posted:

Why?  The car is so light do we really need a stiffer shock?

Coilovers are not synonymous with stiffer shocks. They will give you a higher spring rate though. Ride quality is based on both spring rate and shock valving with respect to axle loading and suspension type and geometry. Plus tire sidewall height and pressure.

WOLFGANG posted:

The shock towers look pretty flimsy to me. The picture was only an example of the older Koni adjustables.  (New ones appear to be yellow now).  It looks like the adjusting collar and sleeve are steel by the rust.  Seems most of the new ones are alloy.  I like the idea that you can adjust the stiffness from comfort to aggressive.  They do get pricey. 

I've got the Koni adjustable shocks on my car-- but I was talking about setting up the car with a beam and true coil-over suspension.

In that case, the torsion leaves would be removed and replaced with something that allows the control arms to float. The spring over the shock ("coil over") would be attached at the control arm on the bottom (plenty strong), and the shock tower at the top. Since the entire car is held up by those attachment points in a true coil-over suspension, I was pointing out that the stock towers are pretty flimsy for the job.

Post Content
×
×
×
×
Link copied to your clipboard.
×
×