Skip to main content

Replies sorted oldest to newest

@vividsol posted:

i'm still trying to find out what/who manufactured the body I have.  you can somewhat see the 2 holes in the pillar in this photo.  The doors that were purchased have the 3 holes.

IMG-0264

@vividsol You're asking the group to identify your Speedster body and you've given us little to nothing from which to fathom a guess. Post pictures of the entire driver's side, rear, passenger side, front, interior, engine bay, front trunk, etc in your original thread and you might get your answer.

"Did the hinges you ordered fit?"

Nope, I ordered only one from VS and it was too thick when the door was closed. So I moved the bad one from the top of the driver's door to the bottom of the passenger door. One of the screw holes had broken, and the bushing was loose. It is fine...for now.

Perhaps the VS hinge would be a good starting point if you could modify it with the proper tools and lots of patience...IMG_1791

Attachments

Images (1)
  • IMG_1791
Post Content
×
×
×
×
Link copied to your clipboard.
×
×