Skip to main content

Sounds like rotors scraping agains rotor shield. Scrape every half to full rotation. Not . It’s not because there are no shields on rear. only on the front. Have checked, neither wheels or tires rubbing anything. Jacked front and back. Spun each wheel. Totally quiet. Lubed shock bushings. No scraping sound when reversing. Not a bad bearing sound. Not constant. Just annoying.

Any thoughts?

Original Post

Replies sorted oldest to newest

A 36mm socket and breaker bar, plus possibly a 2 foot cheater bar(I usually put at least 250 ft. lbs. on them). I don't consider them special tools if I know I'll need it more than once.

Disc brakes are self-adjusting. The parking brake cable adjustment is usually at the lever in between the seats.

It is possible that the caliper brackets aren't properly centered especially on the rear. That can require a couple washers to give the right clearance for the bracket to clear the rotor.

Post Content
×
×
×
×
Link copied to your clipboard.
×
×