Skip to main content

Don't have much to do while waiting on Greg to get my Spyder project done so I thought I'd make a set of escutcheons for the shoulder straps where they go thru the firewall. My Dash around the gauges will have the same pattern.  I'm using a 3/8" cratex bar to do the engine turning on polished stainless steel...........Bruce

Attachments

Images (2)
  • IMG_3019
  • IMG_3017
Original Post

Replies sorted oldest to newest

@aircooled  I would like to have this wheel on my car Bruce, but the horn button needs to have the P shield changed for a IM shield so I need someone to do such a transfer and make it right, but I think you could make this wheel easily with your skills.  Mike Lempert made this one, his skills are very good as you can see.  The hub was made by another to hold the P 82mm I think the button is and it is fitted to a hub that is fitted to an Ididit, column.  If he Did it, you can do it. 

Post Content
×
×
×
×
Link copied to your clipboard.
×
×