Skip to main content

Replies sorted oldest to newest

The bottom rocker is attached with screws with nuts. You must first remove the black rubber inside. Just remove one end and pull and it should come out of the center. If the rocker is not to old this should be no problem. The older it gets the rubber gets fairly hard, and is a bit harder to do. To install just reverse the order but you may have to place the rubber in the sun to soften it up abit or use warm water if able.
Hope this helps......I do not have trim (black car looks cool without )so I could not tell you but I think either screwed on or adhesive is applied

Bruce
Post Content
×
×
×
×
Link copied to your clipboard.
×
×