Skip to main content

edsnova posted:

I'll really love seeing what you fab up to allow for scheduled preventative maintenance on that engine, nestled as it will be amidships and (presumably?) with its dipstick, oil fill, alternator and thermostat hard against the firewall. 

most of it is accessible but we've added a bit more freedom with removable supports

IMG_20190323_151937 here in India it's a bit difficult to find parts for imports on such short notice, i managed to find an alternative to beetle headlights that are nearly a direct fit. They're off of a mid 2000s "hindustan ambassador", a car that is basically a Morris Oxford  series III (1956-1959) that evolved and remained in production in India until a few years ago. It was commonly used with bullet proofing by politicians and military personnel.IMG_20190321_092323

I'm building this at home in a place called Goa, which is basically a coastal tropical tourist destination. It's quite difficult and slow when work can't be done in house as lathe shops are slow and unskilled.  when my partner for these projects, Nigel, went to a bigger city, he gt as much work and sourcing done as possible. the running gear is all d16b Honda, basic suspension arms and hubs from a honda but the upper end is all custom. going for a pushrod suspension because why not.

IMG_20190320_163256IMG_20190320_162450

I managed to find these Watanabe wheels in a scrapyard for $200 and restored them as far as I could, I plan on making a steel wheel widening jig to give that a try aswell. 

 

IMG_20190320_163002

I wanted o do something different with the seats. I started with drawings of recaro pole positions, cut the sides on a computerized  hot wire cutter and refined it to something close to what i wanted.

 

IMG_20190323_112835IMG_20190323_112853i

Im trying to make them like Singer seats without headrests. a little filling is needed to restore the symmetry but it's still in the pre mould stage. plan to make them in carbon fiber.

IMG_20190324_112911_640IMG_20190324_112847_577

 

hope you guys are enjoying the build so far. I'm not sure if it classifies as a replica anymore, seems more like a 356 inspired custom car.

Attachments

Images (9)
  • IMG_20190320_162450
  • IMG_20190320_163002
  • IMG_20190320_163256
  • IMG_20190321_092323
  • IMG_20190323_112835
  • IMG_20190323_112853
  • IMG_20190323_151937
  • IMG_20190324_112847_577
  • IMG_20190324_112911_640
Last edited by The_Rusty_Cashew

this week we worked on the interior panels and latch mechanisms.IMG_20190404_174203

We also test fitted the headlights and we hand built the horn grill too

https://www.instagram.com/p/Bv..._button_share_sheet/

IMG_20190407_122741

we wanted seats like the singer 356 without a headrest so we took the profile of recaro pole positions, cut them down and made a mould. then made them in carbon fiberIMG_20190406_092713we also restored our wheels, a set of watanabes I bought from the scrap market. theyre real 2 pc wheels

https://www.youtube.com/watch?v=8S4WvFyPy2w

IMG_20190405_155854

Attachments

Images (4)
  • IMG_20190404_174203
  • IMG_20190405_155854
  • IMG_20190406_092713
  • IMG_20190407_122741
 

we wanted seats like the singer 356 without a headrest so we took the profile of recaro pole positions, cut them down and made a mould. then made them in carbon fiber

Thanks for sharing how you used the drawings to get profile and produced a mold.  What type of foam did you use for your mold/mould?  And why did you choose carbon fiber instead of fiberglass?

Last edited by Todd M
Todd M posted:

Thanks for sharing how you used the drawings to get profile and produced a mold.  What type of foam did you use for your mold/mould?  And why did you choose carbon fiber instead of fiberglass?

I took these drawings, traced the outline and gave it to my local thermocol cutter to cut. 

recaropoleposition-sizeguide

It's a bit to difficult to post all my pictures here and the  browser freezes on my phone when it sees all the pictures so you could watch the progress in more detail here.

https://www.facebook.com/therustycashew/

we used carbonfiber to give it that wow factory and to showcase the work we do.

Attachments

Images (1)
  • recaropoleposition-sizeguide

Hi guys, it's been a while. I had to stop the project last year for some unforeseen circumstances. The project progressed quite a bit and all that's left now are fluid lines, interiors, paint and wiring.

This is what she currently looks like:



PXL_20210527_094636548.MP

I'm also attaching a video of a walk around in its current condition.

https://youtu.be/Ju6ztkC69I4

Things will progress on it in a couple of months when my 2 post lift is up.

Attachments

Images (1)
  • PXL_20210527_094636548.MP

Add Reply

Post Content
×
×
×
×
Link copied to your clipboard.
×
×