Our speedsters drive nice and straight. However, the steering wheel is of center. I didn't want to mess with adjusting the tie rods. I took the steering wheel off to just rotate it a few teeth. It can off easy. Putting it back was a pain.
This may be a dumb question, is the steering shaft suppose to move in and out? When I was putting the steer wheel back on I had to push real hard to compress the spring. when I did that the shaft would push in an inch or so making it impossible to put the steering wheel nut back on. I had to use a strap at the knuckle to keep it from pushing in. This just doesn't seem right to me.