Skip to main content

Replies sorted oldest to newest

I don't want to appear confrontational since there's a lot more knowledge out there than I have, but my thinking is that the center leaves holder is only there to stop them from rotating, since the leaves slide thru it (or do the center grub screws go thru to the leaves). The Outer Grub Screws are what hold the arms and keep the leaves from traveling from side to side. I was contemplating removing the center grub screws and replacing them with short bolts with grease fittings installed in them. This would take all of the lower spring action away and turn the lower leaves into an anti sway bar. I do have (1) adjuster on the upper beam and to my knowledge NO leaves have been removed. Thanks for the input and more is appreciated.
Post Content
×
×
×
×
Link copied to your clipboard.
×
×