Skip to main content

Replies sorted oldest to newest

Hi....when I purchased the car the Hard top came with it. It is my understanding that once the owner purchased the Hard Top it needed to be custom fit to the CMC widebody, along with having the side curtains fabricated to fit the car perfectly. The fellow who actually did the Hard Top modification was Alan Merklin (Dr. Clock) a member of this club who did a great job! For more info on how you can get a Hardtop for your CMC narrow fender and how it will need to be modified I would go directly to Alan to get the straight scoop on what it will take.

Good Luck!

Looks like you have a CMC? If so, what is the hardtop off of and how much modifying is needed it to fit my CMC narrow fender. Thanks

I believe all hardtops require custom fitment to each car. The windshield placement fore and aft and possible different corner post angle require this.

The bodies are the same between narrow and wide with the exception of the fender flares.

Last edited by DannyP

Altering that top was a labor intensive,  spent half a day making enough carboard templates to build a kid's play house. Finally figured out where to cut across the top L to R at the right place on the radius. That was the most difficult part of the fitment. The top needed to be extended 2 1/2" inches so I made up some sheet metal temp plates ,screwed them in place from the top down only to find that doing so changed the radius arch. The second attempt was using heavy cardboard against the underside glassing that in place with a wide area of glass outside the carboard margins.  As that began to set up, I put back a couple of the upper sheet metal plates  by screws adjusting the screw tension found the correct radius then let that set up overnight. Cut out the cardboard template applied glass cloth and resin to the underside, let that set up then removed the sheet metal plates and screws glass cloth and resin that area. Lastly sand and fill a few times, shot some sealer, primer base and clear coat, NO matter what I did I couldn't get the back plexi glass to seat into the rubber plexi glass to hard top lip, so I had a friend from a local glass shop drop by.....boom, done in ten minutes with the right tools.  The top came out nice but I don't think I would do another though.

When Rusty-Tubs sold the hard tops, they had one for real Speedsters and one for replicas.  The replica one has the rear base untrimmed so it could make up for different windshield positioning.  I don't believe the tops are available any longer (not is Rusty-Tubs).

PLASTIKON Porsche 356 Speedster hardtop NEW

PLASTIKON Porsche 356 Speedster hardtop NEW
<form action="https://order.store.yahoo.net/yhst-63230418117019/cgi-bin/wg-order?yhst-63230418117019+plastikon-porsche-356-speedster-hardtop-356" id="yfc_1" method="post">
Item# plastikon-porsche-356-speedster-hardtop-356
$1,295.00
Availability: Usually ships the same business day
<input class="ys_primary" title="Add to cart" type="submit" value="Add to cart" /></form>

Product Description

. Thanks to the volume, we are able to offer lower pricing on these tops.

PLASTIKON hardtop for the Porsche 356 Speedster. These are nothing like the flimsy clones and older versions from the late 60's and 70's. Molded drip rail, full header bow with reinforced latch area. Ready for final prep and paint. Rear window and rubber included. Freight charges apply. These are in stock and ready to ship. Standard crate up fee is $125.00 or pick up in person.

We can also deliver to the crater and packaging company of your choice.

To see what the non kit car version looks like, use our search engine for, "plasticon".

Be aware they are cut longer, wider, and the arc on the wide window fits only Plasticon style side curtains.

Think of an upside down cone. Keep trimming till it fits yours, as all kit cars are not alike.

These can be painted and finished in any color for $495.00 Axalta paint products with an evercoat G2 base.
@DannyP posted:

Am I guessing that the top was made for a non-replica Speedster, Alan? And you had to add LENGTH to the top?

So to answer @Heritage 2008 a top made for a replica could be fitted(and it will require fitting) to any replica? I think?

Yes add to the length and I forgot to mention that you need a hollow bulb weatherstrip along the bottom to conform the tub shape.

Add Reply

Post Content
×
×
×
×
Link copied to your clipboard.
×
×