Skip to main content

Replies sorted oldest to newest

Thanks.

Here I go any help would be appreciated. Photos, descriptions, thoughts, etc.

I am almost finished with a old Speedster update. It currently has Nerf bars. I'd like to fit bumpers.

I see on the Vintage Speedster site (under parts) they offer a bumper. They also list, Front Bumper Bracket, Front/Rear Bumper Inner Mount, Front/Rear Bumper Outer Mount, Rear Bumper Bracket. There are no photos or descriptions as to what these parts do and how they do it. 

I can't tell what is or is not needed, so I can decide if they might work as is or need mods, and or not even in the ball park.

As to the bumper shown on the website, the bumper photo shown does not look like the bumper shown on the finished cars, in the website photo section.

I need to know if the bumper they have listed in the same as the one shown in many photos on the website, here is an example of what I need for a front bumper, 

http://www.vintagespeedsters.c...016/04/gallery_5.jpg

The style bumper I'm looking for has the nose (rear portion that fits toward the nose) contour, allowing the bumper to fit closer to the front body contour.

Any help would be appreciated. 

Sometimes they are hard to get  a hold of but not usually. The gals that answer the phone will usually help you with the parts.  The bumper in the photo looks like mine and that is the standard bumper, you have to trim them to fit the contour of your body. You need the bumper, the trim pieces, the inner brackets with their rubber seals that go against the body and the outer mounts which are bolts with donut cushions. It's pretty simple.

Last edited by Fpcopo VS

Add Reply

Post Content
×
×
×
×
Link copied to your clipboard.
×
×