Skip to main content

Replies sorted oldest to newest

Yes the VS top must use VS bows as the L & R radius is different and it's nearly impossible to re-bend them ( I do know this all too well ) So if I buy the CMC bows from you , that would be funds toward your needed VS bows now available from Greg at VMC  . Regretfully,  the VS bow set I have I cut 2" off of the taller center bow at the bottom, I didn't use it after all and have a metal sleeves to slide over it  to bring it back to the original length.

My CMC ones appear to be raw steel tubing - I was going to cover them with shrink tubing (used on electrical wiring - per Gordon's recommendation) and then heat it with a hairdryer to make it look pretty. I do like Mike Mc's mod of using adjustable Heim joints at the ends. Gives a more factory finished look.

https://www.speedsterowners.co...091#2135445019293091

 

Last edited by WOLFGANG
Post Content
×
×
×
×
Link copied to your clipboard.
×
×