Skip to main content

Please do not use the Classified section for discussion.   Replies not relevant to the specific item for sale, will be deleted.
The Classified section is open to any individual (non-commercial firms) posting of items for sale or wanted. Members posting commercial advertisements must be enrolled in a Supporting Merchant program.  

Replies sorted oldest to newest

 I scrapped three of the CMC FF skull cracking show bars because I couldn't give them away

I realize they are not that popular, but you never really need one until two wheels leave the pavement.

If I were to use a CMC bar I would fill it with sand to keep it from crushing on impact.

But I would rather not go that route. Prefer a real one, LOL

Last edited by ilovespeedsters

I be curious: Why are you concerned (worried?) as to what happens when "two wheels leave the pavement"? Personally, I'd be happier than hell that I've still got two wheels "on the pavement."  At my age, I vividly recall early road races (OK, ...very early) at Santa Barbara airport, Bakersfield, and Palm Springs, when the Speedster pretty much ruled SCCA's F-Class with MG's their only real competition. What I don't remember is any Speedster turning turtle.  Those two wheels might have left earth on occasion, but all four...uh-uh. Hitting something - like a hay bale - or someone, was pretty common and an "ejection" every once in awhile proved fatal (seat belts weren't worth a shi# and often weren't worn)...but flipping your ride was just not a big concern. I'm thinking it wasn't until the late 60's that the roll bar became "de rigueur" when racing in SCCA competition....and that was probably most attributed to "Ambulance Followers" camping out at the tracks waiting like vultures for an easy meal.  Anyway, I digress from my original question:  Unless you hope to sneak your replica into a sanctioned race (forget it 'cause that'll never happen) that requires one, WHY do you think you really need a roll bar in your speedster? If the answer is "I think it looks cool," then for sure go for it!  Otherwise, I suggest you spend the $$ on other Speedy goodies. Gawd knows there many such accoutrements out there to put a real dent in any SOC knucklehead's wallet. 

FYI, a single non-triangulated hoop won't cut it.

The SCCA allows autocross in an open car without a rollbar. They require a helmet only.

DE events with the SCCA or PCA require 5 or 6 point harness in an open car. Also the rollbar must be triangulated, and at least 2 inches clearance to the top of the helmet. They also require arm restraints for an open car. They also have the "broomstick" rule where they place a broomstick on the windshield and rollbar and the stick must clear the helmet. It matters not that the Speester windshield is not structural in any way.

Most times they both require long sleeves and pants, but that gets suspended on really hot days.

Make sure you empty EVERYTHING out of your car and frunk, nothing loose is allowed.

This one passed the inspectors at Irwindale Raceway (NHRA) in SoCal. A Nomex jumpsuit with gloves, Hand Restraints or Side nets, Helmet (up to date), and 5 point seat belts.  I made a wood mock-up first out of 1.5" stock. When everything fit precisely , I took it to a shop that can bend 1.750" DOM tube. He bent it and then I final fit it and welded it in place. It's removable as well..............Bruce

Attachments

Images (4)
  • DSC_5003
  • DSC_5004
  • DSC_4965
  • DSC_4966

Add Reply

Post Content
×
×
×
×
Link copied to your clipboard.
×
×