Skip to main content

Okay, like several others out here I tried to do the CMC seat and had mostly ok luck (how's that for positive?). They're not as pretty as others but they'll do for now.

The top edges of the seats look like crap because the edge of the rug is pulling away. The Super 90 was great but I'm wondering if I could a tube of something to clean them up? Almost considered riveting them but yeah no...

Original Post

Replies sorted oldest to newest

Bears telling the tale a-gain .... 1992 Working in a narrow one car garage on a cool fall morning with a kerosene heater running , I was installing carpet in a Bradley GT  when through the garage back door comes a friend with Dunk'n Donuts and coffee. ( All this takes place in less than 10 seconds)  hands me a coffee and I asked him to get me another can of off the shelf as I  handed him a empty Super 90 adhesive can.... Stuffing our faces and enjoying the coffee with the usual BS, there was an huge explosion that blew every florescent bulb out of the lights ,  knocked photos from the wall in the living room and breaking couple of garage door windows.  I turn to Rocky with a ........WTF was THAT ? He has a blank stare because he can't hear jack shyt as I say" You OK " ?   All this as my neighbor Mark that heard the explosion from across the street comes running through the back door with the same WTF was THAT question ... Rocky in error had set the empty can on the hot heater, the can exploded with the top silver section of the can  imbedded itself into the plywood roof, the real kicker was that the rest of the can remained in tact but the recoil collapsed the heavy gauge metal heater half way to the floor....

Last edited by Alan Merklin
Post Content
×
×
×
×
Link copied to your clipboard.
×
×