Skip to main content

Wanted to thank you all for visiting the crazy dune buggy folks on Thursday night and for Cory and Kelli participating "yes participation trophies" for the Speedster guys  on Friday night.   I want to throw this out there to you all.   I know it's a year away, but I personally am in possession of a "second valve cover track".  I'd be more than happy to bring this to your hotel when I pull into town and you all can set it up over there and do a speedster only race.   Get yourself tuned up and participate in the Friday night race again on the stage for the ACME Cup.    

If you want to see build examples, chassis design, wheel types, etc. visit: https://acmecup.com/chassiswheels/

Just remember, try to avoid rubber wheels on the "outside of the valve cover" where they could make contact with the side rails.  If you could get the wheels inside the valve cover perimeter, you'll keep the width at a minimum and if you do scrape the sides of the track, you have metal skipping off the rails.  If you do have your wheels on the outside of the racer, hard plastic, metal, or a solid composite material.    Use stick on weights inside to 5 pounds !!!!     Its a lot of fun.

Add Reply

Post Content
×
×
×
×
Link copied to your clipboard.
×
×